Installing cynogenmod on YU 5010A (REPLACING STOCK ANDROID WITH CYNOGEN OS)

THIS PROCESS WILL WORK 100% FOR YOUPHORIA IF YOU FOLLOW GUIDE PROPERLY

THIS IS WHAT YOU NEED:
KEEP BATTERY CHARGED TO AT LEAST 50%.
1)DOWNLOAD cm-12.1-YOG4PAS1T1-crackling-signed-fastboot.zip FROM HERE: https://cyngn.com/support/
OR
http://builds.cyngn.com/factory/crackling/cm-12.1-YOG4PAS1T1-crackling-signed-fastboot.zip 
2)DOWNLOAD FLASH TOOLS FOR YUPHORIA FROM HERE: https://github.com/YUPlayGod/factory-image-flash-tools
OR
https://github.com/YUPlayGod/factory-image-flash-tools/archive/yuphoria-lollipop-windows-flashtools.zip  
3)FOR INSTALLING DRIVERS USE PDANET+ FROM HERE: http://pdanet.co/

NOTE: BACKUP ALL YOUR DATE SINCE FLASHING WILL DELETE EVERYTHING IN INTERNAL MEMORIES.

STEPS:
1>PREPARE FLASH TOOLS : 
-EXTRACT FLASH TOOLS IN A FOLDER>>EXTRACT DOWNLOADED ROM(cm-12.1-YOG4PAS1T1-crackling-signed-fastboot.zip) TO THIS FOLDER>>DONE.

MAKE SURE ALL ROM FILES ARE ADDED TO FLASH TOOLS FOLDER EG. system.img, boot.img etc 

2>SWITCH OFF YOUR PHONE>>NOW KEEP VOLUME UP KEY PRESSED AND CONNECT PHONE TO COMPUTER WITH USB>>YOU SHOULD SEE FASTBOOT MODE ON YUPHORIA SCREEN>>DONE.

3>NOW GO TO FLASH TOOLS FOLDER AND RUN flash-all.bat by double clicking on it.

4> WAIT FOR 20-30 MINUETS AS IT TAKES TIME, DO NOT DISCONNECT USB.

5>AFTER 30 MINUETS SEE IF CYNOGEN OS IS STARTED TO HOME SCREEN OR REMOVE BATTERY AND REINSERT IT AND START PHONE.

DONE YOU HAVE CONVERTED YU5010A TO YU5010.

NOTE: IF YOUR DEVICE IS NOT DETECTED ON RUNNING FLASHALL.BAT YOU HAVE NOT INSTALLED DRIVERS FOR DEVICE.